潞城JY7205系列套管螺纹密封润滑脂

所属分类：潞城油气钻采
浏览次数：
二维码：
发布时间：2024-03-13 11:43:38

我要询价

产品概述

JY7205 系列套管螺纹密封润滑脂

JY7205 Sealing grease for casing thread

产品描述 Description

本品以皂基稠化剂稠化优质基础油，并加入多种对环境无害的无铅固体填料和防止硫化氢等腐蚀性物质的功能添加剂精制成。

This product is made by thickening high-quality base oil with soap-based thickener, and adding a variety of environmentally friendly lead-free solid fillers and functional additives to prevent corrosive substances such as hydrogen sulfide.

A型符合API 5A3标准，B、C型符合SY/T 5199-1997标准

Type A complies with API 5A3 standards, and types B and C comply with SY/T 5199-1997 standards.

性能特点 Performance characteristics

在高温高压下，具有优良的耐中等浓度的酸、碱、盐和含硫天然气等介质的可靠密封性能。

Under high temperature and high pressure, it has excellent and reliable sealing performance against medium concentrations of acid, alkali, salt and sulfur-containing natural gas.

主要理化指标

分析项目 Analysis Items	质量指标 Quality Index			试验方法 Test method
	A	B	C
外观 Appearance	黑色/灰色均匀油膏 black/grey uniform grease			目测 Visual inspectio
锥入度,0.1mm Cone penetration, 0.1mm	310～360			GB/T269
滴点，℃ Dropping point, ℃ 不低于≥	250	200		GB/T3498
钢网分油(65℃,24h) (m/m)% 不大于 Steel mesh oil separation (65℃, 24h) (m/m)% ≤	5.0	8.0		SH/T0324
蒸发度(150℃,1h), (m/m)% 不大于 Evaporation degree (150℃,1h), (m/m)%	2.0	3.0	4.0	GB/T0337
抗水淋性(65℃,2h) (m/m)% 不大于 Water spray resistance (65℃, 2h) (m/m)% ≤	5.0			SH/T 0109
逸气量，ml（65.6℃，120h） Outgassing volume, ml (65.6℃, 120h)	≤20
水沥滤，%（65.6℃，2h） Water leaching, % (65.6℃, 2h)	≤5.0
涂刷性（-17.8℃） Paintability (-17.8℃)	能涂刷 Can paint
腐蚀（45#钢,100℃,3h） Corrosion (45# steel, 100℃, 3h)	合格 Qualified			SH/T0331

应用推荐 Application

适用于油气田钻探深井套管螺纹的密封和润滑。A型用于深井井下套管，使用温度200℃，压力59MPa，能耐酸碱盐等化学介质。B型C型适用于5000米深以内的套管。

Suitable for sealing and lubrication of casing threads in deep well drilling in oil and gas fields. Type A is used for deep well downhole casing, with an operating temperature of 200°C and a pressure of 59MPa. It can withstand acid, alkali, salt and other chemical media. Type B and type C are suitable for casing within a depth of 5,000 meters.

包装形式 Packing

20L塑料桶或按用户要求包装

20L plastic barrel or packaged according to user requirements

注意事项 Precautions

涂敷前应将螺纹接头部位用煤油或其它溶剂清洗干净，并晾干或吹干；

Before coating, the threaded joints should be cleaned with kerosene or other solvents and dried or blown dry;