JY6302合成酯型抗燃液压油
Ester Non-flammable Hydraulic Fluid, EXELUBE® JY6302
◆产品描述
以特殊结构的合成酯为基础油,均衡调配氧化腐蚀抑制剂和润滑添加剂等功能剂加工而成。属无毒,可生物降解的绿色润滑剂。按国际标准ISO8681-85分类属ISO-L-HFD类的合成酯型抗燃液压油。
It use based oil with special structure of the synthetic ester, balanced deployment of oxidative corrosion inhibitors and additives such as lubricant processing function. Is a non-toxic, biodegradable green lubricant. According to the international standard ISO8681-85 classification is ISO-L-HFD synthetic ester type fire-resistant hydraulic oil.
本产品根据国家标准GB3141-92,按40℃运动粘度分为32、46、68、100号四个粘度牌号。
It is according to national standards GB3141-92, according to 40 ℃ kinematic viscosity is divided into four viscosity grades 32,46,68,100.
◆特点
闪点燃点高,难燃性良好,粘温性能好,使用温度压力高,与金属非金属材料适应性好,降解性好,生物安全。
High flash point ignition, good flame retardancy, good viscosity-temperature performance, high temperature and pressure, good adaptability with metal non-metallic materials, good biodegradability and biodegradability.
◆主要理化指标
项目 | 技术指标 | |||
ISO粘度级别 | 32 | 46 | 68 | 100 |
运动粘度,mm2/s 40℃ 100℃ 不小于 | 28.8-35.2 7 | 41.4-50.6 9 | 61.2-74.8 11 | 90-110 13 |
粘度指数 不低于 | 180 | |||
闪点(开口), 不低于 | 270 | |||
燃点, 不低于 | 300 | |||
岐管着火试验 | 通过 | |||
清洁度 | 7 |
Item | technical indicator | |||
ISO Viscidity grade | 32 | 46 | 68 | 100 |
Kinematic viscosity,mm2/s 40℃ 100℃ ≥ | 28.8-35.2 7 | 41.4-50.6 9 | 61.2-74.8 11 | 90-110 13 |
Viscosity index ≥ | 180 | |||
Flash point (opening),≥ | 270 | |||
Burning point, ≥ | 300 | |||
Manifold fire test | Pass | |||
Cleanliness | 7 |
◆应用推荐
应用于钢铁厂连铸生产线,高炉,热轧,拆炉机,铸造,钢水包以及电厂,煤炭行业要求抗然的液压系统,可以替代磷酸酯液压油。使用温度-30-200度,使用压力可达40MPa.。
Used in the steel plant continuous casting production line, blast furnace, hot rolling, stave furnace, casting, ladle and power plants, the coal industry requires anti-stress hydraulic system, can replace the phosphate ester hydraulic oil. Operating temperature -30-200 degrees, the use of pressure up to 40MPa.
◆使用注意事项
替代矿物型液压油时,要求系统含矿物油量低于5%;
Alternative mineral hydraulic oil, the system requires mineral oil content of less than 5%;
替代水基液压油时,要求系统含水量低于0.2%;
Alternative water-based hydraulic oil, the system requires less than 0.2% moisture content;
替代磷酸酯液压油时,要求进行系统密封材料和涂料的相容性试验。
Alternative to phosphate ester hydraulic fluids requires compatibility testing of system seal materials and coatings.