镇江JY6301水乙二醇型抗燃液压液

 JY6301水乙二醇型抗燃液压液

 Non-flammable Hydraulic Fluid, EXELUBE® JY6301

◆产品描述

本产品系以水和乙二醇为基础液，并加有油性、抗氧、防锈、抗泡等多种添加剂精制而成。按国际标准分类属 ISO-L-HFC 类的水－乙二醇型不燃液压油。本产品按 40 ℃运动粘度分为 40 和 50 两个粘度牌号。

JY6301 is based on water and glycol-based liquid, and add oil, antioxidant, anti-rust, anti-foam and other additives refined. According to international standards are classified as ISO-L-HFC water - glycol type non-flammable hydraulic oil. It is divided into two viscosities of 40 and 50 by 40 ° C kinematic viscosity.

◆特点

本产品具有高的粘度系数，良好的抗燃、抗磨损、抗剪切性能，良好的防锈性、稳定性和润滑性，对大多数金属和非金属材料的适应性好，使用寿命长，对人体无伤害，对环境影响小，废液不需经特殊处理，符合环保要求等特点。 

JY6301 has high viscosity coefficient, good flame resistance, abrasion resistance, shear resistance, good rust resistance, stability and lubricity, and most of the metal and non-metallic materials, good adaptability, long service life, No harm to the human body, little impact on the environment, waste no need special treatment, Meet the environmental requirements.etc.

◆主要理化指标

◆应用推荐

本产品广泛应用于有明火、高温环境下运行的液压系统，成为重要的抗燃液压介质。主要适用于钢铁、煤矿、轻工、化工、机械加工、塑料加工工业中需要防火的液压系统，如：炼焦炉门、拦焦车、压铸机、炉顶料钟、挤压机、转炉烟罩升降机构、锻压机、电炉启盖、倾料机构、铸造机、钢水包滑动水口、连铸机、热轨机、焊接机器人、塑料挤出机、自动焊接平夹具、表面电镀机、玻璃成型机等。 使用温度范围：-50 ℃～ +60 ℃，使用压力可达 20Mpa 。 

JY6301 is widely used in open flame, hydraulic system running under high temperature environment, become an important anti-combustion hydraulic medium. Mainly used in steel, coal mine, light industry, chemical industry, machining, plastic processing industry need fire-proof hydraulic system, such as: coke oven door, stop coke car, die-casting machine, Forging machine, Forging machine, Electric furnace cover, Tipping mechanism, Casting machine, Ladle sliding gate, Continuous casting machine, Hot rail machine, Welding robot, Plastic extruder, Automatic welding fixture, Surface electroplating machine, Glass forming machine Wait. Operating temperature range: -50 ℃ ~ +60 ℃, the using pressure up to 20Mpa.

◆同类产品 Similar products

◆使用注意事项

· 一般情况下，开式油箱以不超过 55 ℃，闭式油箱不超过 65 ℃为易。温度过高，水分蒸发过多，会导致液压油粘度增大而影响使用。

Under normal circumstances, the open tank with no more than 55 ℃, closed tank no more than 65 ℃ is easy. If temperature is too high, and too much water evaporates will lead to increased viscosity of hydraulic oil to affect the use.

· 使用本品时，要注意与金属和非金属配套材料的相容情况。

When using this product, please pay attention to compatibility with metal and nonmetallic materials.

· 本品与下列常用材料相容：

It is compatible with the following commonly used materials:

环氧树脂、酚醛树脂、青铜（含 Pb<20 ％），黄铜、紫铜、塑料制品，丁腈、氟、硅橡胶，聚四氟乙烯、尼龙和经赛璐珞和酚醛树脂处理后的纸等。

Epoxy resin, phenolic resin, bronze (containing Pb <20%), brass, copper, plastic products, nitrile, fluorine, silicone rubber, PTFE, nylon and celluloid and phenolic resin treated paper.

· 本品与下列常用材料不相容：

It is incompatible with the following commonly used materials:

 工业油漆（醇酸漆），镉、镁、铅锌（少量表面镀锌除外），铝（铝合金及阳极化处理后的铝除外），天然橡胶、聚氨酯橡胶、皮革、软木、一般滤纸、石棉等。

Industrial paint (alkyd paint), cadmium, magnesium, lead and zinc (except for a small amount of surface zinc), aluminum (except aluminum and anodized aluminum), natural rubber, polyurethane rubber, leather, cork, general filter paper, asbestos Wait.

· 本品不能与矿物油型、乳化液型和酯型液压介质混用，故使用本品前，应将液压系统清洗干净后再灌注本产品。

This product can not be mixed with mineral oil type, emulsion type and ester type hydraulic medium. Therefore, before using this product, the hydraulic system should be cleaned and then filled with this product.

· 使用过程中，应定期（一般三个月）检查油品外观、粘度、 PH 值、泡沫等情况，发现问题及时处理。

During use, should regularly (usually three months) check the appearance of oil, viscosity, PH value, foam, etc., and found that the problem is handled promptly.